Nematron ePC-Lite Series with N2800 CPU Manuel d'utilisateur télécharger pdf (Page 4)

Specifications

Front Panels

The ePC series has NEMA 4/4X/12 sealed front panels when mounted in an appropriate NEMA

rated enclosure. See Chapter 2 for more details on installation and selection of an appropriate enclosure.

All four sizes have very similar front panels with different dimensions.

Figure 1.0: ePC Series Front Panel Comparison

The standard front panels are powder coated aluminum. The optional Stainless Steel front panel is type

304 and will not contain a logo pocket or logo on the front. The window area is clear polycarbonate when

ordered without a touchscreen. The touchscreen option is chemically strengthened glass covered by a

polyester overlay. The polyester overlay has better resistance to chemicals than the polycarbonate

window. Depending on the chemicals involved in your application consideration should be given to

choosing the proper window material. See Appendix X for a chart of some common chemical

resistances. In addition there is a Rack Mount front panel option for the ePC1900 (19” unit) only. This

front panel is powder coated aluminum and is 9U high with four rack mount spaced counter-bored

mounting holes on each side of the panel. This panel is not NEMA sealed when installed.

1 2 3 4 5 6 7 8 9 ... 20 21

Pas de commentaire

Nematron ePC-Lite Series with N2800 CPU Manuel d'utilisateur Page 4