Nematron iPC-Fanless Series with N2800 CPU Manuel d'utilisateur télécharger pdf (Page 17)

________________________________________________________________________________________

Document No. DOC-IPC-003,

User Manual iPC-Series & nPC300, Rev B Rel. 12-2013 Page 17 of 24

Protective Cover Installation

(Optional if desired)

Step 1: Gather the parts of the protective cover; top shell,

bottom shell, label insert, and wire tie. The picture

shows wire tie (top), label insert (right), bottom

shell (left), and top shell (lower right).

Step 2: Insert your pre-wired connector (with the screws facing

up) into the bottom shell. (See manual for cable

wiring instructions).

Step 3: Insert the wire tie from the bottom shell, loop around the

cable and come back out of the opposite hole in the

bottom shell.

Step 4: Tighten the wire tie around the cable and the bottom

shell.

Step 5: Seat the top shell onto the bottom as shown. Insert label

strip (if desired) in slot on top shell and bottom shell.

Step 6: Snap the top and bottom shells together.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Nematron iPC-Fanless Series with N2800 CPU Manuel d'utilisateur Page 17